Corrosion resistance: It can resist the corrosion of acid, alkali, salt and other chemical substances to extend the service life.
High strength: Stainless steel has high strength and hardness, and can withstand greater pressure and load.
Easy to process: easy to cut, weld and process, easy to install and maintain.
Beautiful: smooth surface, beautiful appearance, suitable for occasions with high health requirements.
Standard: ANSI, bs, DIN, GB, ISO, JIS, Jpi, ASME
Material: SS304L, SS316L, SS304, SS201 ect.
Certification: ISO9001,ISO14001,ISO45001
Connection type: Raised Face, Flat Face, Ring Type Joint, Lap-Joint Face, Large Male-Female, Small Male-Female,Large tongue groove, Small tongue groove etc
Woking pressure: ≤1.6 Mpa
Temperature Range: -10degree to +150degree
Tolerance: ± 1%
Design: OEM & ODM
Thickness: SCH5-SCH160
Size: 1/2′ ~ 48′
Type: Butt Welded
Regular flange inspection, including bolts, nuts, gaskets and other parts of tightening and wear.
Check whether the sealing surface of the flange is smooth, there are no rust, scratches and other defects.
Regularly clean the debris and dirt around the flange and keep its surface clean.
For the flange with serious rust, rust removal and anti-rust treatment should be carried out in time.
When the gasket is found to be aging, damaged or deformed, replace the gasket with a new one in time.
When replacing a gasket, ensure that the material, size, and shape of the new gasket are consistent with those of the old one.
If a bolt or nut is loose, tighten it in time.
For long-term operation or frequent vibration of piping systems, flange bolts and nuts should be regularly checked and tightened.
If the flange is found to leak, loose and other faults, should immediately stop and find the cause.
Take appropriate measures based on the cause of the fault, such as replacing the gaskets and tightening bolts.